NEW FEATURES
- New 13mm big-bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling
- New +3mm length aluminum chassis with 22.5 degree kick-up to complement updated front-end geometry and with new shape to reduce chassis scrub with the track surface
- 20deg., 22.5deg., and 25deg. molded bulkheads included for a complete range of caster and kickup options
- New adjustable height steering bellcrank and rack system for optimized bumpsteer at all ride heights and caster angles
- New -1mm kingpin offset steering and caster block set for smoother and more predictable steering through the entire wheel throw
- New steel RC10B6.4 ESC mounting tray shifted forward in the chassis and with a wider footprint to fit electronics, resulting in a further forward weight bias
- New front ballstud mount, top plate, and front wing mount to account for the kickup angle change
- New chassis side rails with 3 optional fan mount locations to choose from depending on chassis length and transmission used
- New cab-forward design RC10B6.4 bodyshell offered in standard (kit) and lightweight (optional) thickness
- Front and rear anti-roll bars included
- 4mm carbon fiber front and rear shock towers with molded protective covers
LEGACY FEATURES
- Steel servo weight included for low CG and forward weight bias
- Front and rear anti-roll bars included
- 4mm carbon fiber front and rear shock towers with molded protective covers
- Aluminum servo mounting system with direct-to-chassis mounts and molded brace with transponder mounting location
- Octalock spur gear and 11mm Octalock LCF pads
- Wide pivot rear aluminum arm mounts for use with 73mm arms and 69mm CVA bones gives more predictable rear traction and an easy-to-drive rear-end feel. Also compatible with 75mm optional arms using the narrowest insert settings.
- Symmetric rear arms with improved geometry and stiffness that can be flipped to allow a “split” for rear shock mounting position. Arms are available in 73mm and 75mm lengths (73mm included)
- Rear hub assembly with modular vertical ball stud camber link mounts and axle height adjustments for precise roll center adjustments
- Outer rear hinge pins captured with bolt head and locknut for increased durability
- Rod end battery brace parts and hardware included in kit
- Molded wire clips included for motor and ESC wires
- +1 carbon fiber steering arms
- Black steel LP serrated wheel nuts
- 69mm CVA bones for reduced bone plunge and minimized friction at drive pin
- Clear body and clear wing included
- Front wing mount and front wing included
- 5mm aluminum clamping wheel hexes
- Fluid-filled gear differential
- Adjustable differential height to allow drive shaft alignment through all ride height & axle height configurations
- Shocks include X-rings for low friction assembly
- Aluminum rear ballstud mount with three link positions for maximum adjustability and added strength
- Lightweight aluminum one-piece top shaft and gear
- Factory Team ball bearing set with 24 precision ball bearings, now oiled instead of greased for a more efficient drivetrain
Please Note items NOT included in kit: Reedy motor, battery, ESC, servo, receiver, wheels, tires, fan, and pinion gear. Assembly and painting required.
SPECIFICATIONS
Power Source: Electric
Terrain: Off-Road
Body Style: Buggy
Scale Size: 1:10 Scale
Assembly Level: Kit*
Length: 390mm (15.35in)
Width: varies
Wheelbase: varies
Weight: varies
Internal Gear Ratio: 2.60:1
Drive: 2WD
* This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.
REQUIRED TO COMPLETE
- 1:10 scale electric motor and electronic speed control
- 7.4V-7.6V 2S LiPo with “shorty” battery dimensions (standard or low-profile height)
- Battery charger
- 2-channel surface transmitter, 2-channel receiver, and steering servo
- Lexan(R) specific spray paint for body
- 1:10 scale off-road wheels and tires
- 4 x AA batteries
Reviews
There are no reviews yet.