Hobbywing Xerun Xr10 Pro Speed Control - Black

High Power Output

Continuous current of 160A and peak current of up to 1200A guarantees a stable and high power output during competitions.

Special Design for Top Racing

Reliable hardware combined with intelligent software (containing 10 common select-to-use profiles)
creates an ideal power solution to 1/10th scale top touring car, Pan car and buggy racing.

Programming / Upgrading / Data reading wirelessly

With Hobbywing’s “WiFi Express” module and iPhone or an Android phone (with the HOBBYWING WiFi Link software installed), the user can remotely program parameters, upgrade firmware and check relevant data of the ESC without leaving the control stand.

Adjustable Throttle & Brake PWM Frequencies

Independent and adjustable throttle & brake PWM frequencies guarantee precise and accurate
throttle and brake control for all classes of competitions (esp. the Stock class).

Efficient Heat Dissipating System

The aluminum casing and reticular heat sink combined with the HOBBYWING patented
copper heat-conductive plates which are attached to the MOSFET board allows the internal
heat to be quickly transferred to the heat sink for dissipation. With the high-performing detachable
cooling fan, a highly reliable heat transfer system for maximum cooling is accomplished.

High current/voltage BEC

The built-in switch mode BEC with a maximum output of 8A and voltage adjustable
between 6V and 7.4V allows the user to use various high voltage servos.

Separate Programming/Fan Port

The separate PRG/FAN port on the ESC can power an external fan to maximize cooling performance or connect the ESC to a LCD program box or WiFi module for ESC programming.

Built-in Electronic Switch

The internal electronic switch with a lifespan of over 50000 on/off cycles completely solves the problems like stuck reed, rusted contact points, and automatic shutdown conventional mechanical switches often have.

Innovative data-logging Function

This ESC features the data-logging function which can record the maximum ESC/motor temperature, RPM and etc. in
real time and allows the user to analyze the recorded data via a the LCD program box or WiFi module after each use.

Specification


Cont./Peak Current - 160A / 1200A

BEC Voltage/Current - 6V/7.4V,4A

BEC Voltage Regulation - Switch Mode

Fan is Powered by - Powered by the BEC (prolongs the service life of the fan)

Fan shroud - Yes

Fan Speed - High

Remote Off - Enabled/Disabled Switchable

(Motor) Drive Mode - Full Sensored/ Sensored or Sensorless Hybrid

COAST - Switchable

PWM Drive Frequency - 0-20% Adjustable

Brake Frequency - 1K/2K/4K/8K/12K/16K Adjustable

Brake Mode - 0.5K/1K/2K/4K Adjustable

Boost Timing Activation - Linear/Traditional/Hybrid Adjustable

RPM/Auto Adjustable

Input Wires - Black-13AWG-200mm*2

Output Wires - Black-13AWG-200mm*3

Input Connectors - No

Output Connectors - No

ESC Programing via

SET Button on ESC - Not Supported

LED Program Box - Not Supported

LCD Program Box - Supported

WiFi Module - Supported

Programming Port - Separate

Firmware Upgrade - Supported

Size - 37.5X31.6X31.6mm

Weight - 95g

Motors - SL BL Motors / SD BL Motors

Vehicles - 1/10th Touring Car/Buggy/Top Racing, 1/10th Drift Car/F1, 1/10th & 1/8th Crawler

KV Rating/T/Count - 2S LiPo/6S NiMH: (Touring Car) T≥3.5T, (Buggy) T≥4.5T.

3S LiPo/9S NiMH: (Touring Car) T≥6.5T, (Buggy) T≥8.5T.